×ðÁúÈËÉú¾ÍÊDz©

²¨·Ö¸´ÓÃÆ÷

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

¼¼ÊõÖ§³Ö

100G 40/48-CH Gaussian Athermal AWG specification

100G 40/48-CH Gaussian Athermal AWG specification

0.0/5 rating (0 votes)

Description

100G 40/48-CH Gaussian Athermal AWG

²úÆ·ÃèÊö/Description
F-tone Networks’s Athermal AWG series products take silica-on-silicon planar technology and it is built with high performance and reliability, which can be used in general DWDM systems. Based on the athermal design and packing, it is totally passive product which does not require any electrical power or temperature control. For 100G AAWG Mux/Demux, it supports up to 48-CH based on a single chipset. Customized wavelengths, package and fiber options are also available.

Ìصã/Features
¡ñ µÍËðºÄ/Low Insertion Loss

¡ñ ¿íÊÂÇé´ø¿í/Wide pass band
¡ñ ¸ßͨµÀ¸ôÀë¶È/High Channel Isolation
¡ñ ¸ßÎȶ¨ÐԺͿɿ¿ÐÔ/High Stability and reliability 

Ó¦ÓÃ/Applications
¡ñ ²¨·Ö¸´ÓÃÍøÂç/WDM Network

¡ñ µçÐÅͨÐÅ/Telecommunication
¡ñ ½ÓÈëÍø/Access Network 

¼«ÏÞÌõ¼þ/Absolute Maximum Ratings

²ÎÊý/Parameters

Ìõ¼þ/Conditions

¹æ¸ñ/Specifications

µ¥Î»/Unit

Min.

Max.

ÊÂÇéζÈ/Operating Temperature

Device Not Powered on Heater Element

-5

65

¡æ

ÊÂÇéʪ¶È/Operating Humidity

ÎÞÀäÄýÇé¿ö/Non-Condensing Environment

5

85

%RH

´æ´¢Î¶È/Storage Temperature

Device Not Powered on Heater Element

-40

85

oC

´æ´¢Êª¶È/Storage Humidity

ÎÞÀäÄýÇé¿ö/Non-Condensing Environment

0

95

%RH

 ¹âѧÐÔÄÜ/Optical Specifications(¸ß˹ÎÞÈÈAWG/ Gaussian Athermal AWG)

²ÎÊý/Parameters

Ìõ¼þ/Conditions

¹æ¸ñ/Specifications

µ¥Î»/Unit

Min.

Typ.

Max.

ͨµÀÊý/Number of Channels

40/48

CH

ͨµÀ¼ä¸ô/Number Channel Spacing

100

GHz

ÖÐÐIJ¨³¤/Center Wavelength

ITU frequency, measured in vacuum.

C-band

nm

²¨³¤¾«¶È/Wavelength Stability

Maximum range of the wavelength error  of all channels and temperatures in average polarization.

±0.07

nm

-1dB´ø¿í/-1dB Channel Bandwidth

Clear channel bandwidth defined by passband shape. For each Channel.

0.20

nm

-3dB´ø¿í/-3dB Channel Bandwidth

Clear channel bandwidth defined by passband shape. For each channel.

0.36

nm

ITU²¨³¤Í¨µÀ²åËð/Optical Insertion Loss at ITU grid

Defined as the minimum transmission at ITU wavelength for all channels. For each channel, at all temperatures and polarizations with connectors.

4.5

dB

ÏàÁÚͨµÀ¸ôÀë¶ÈAdjacent Channel Isolation

Ratio of peak transmission to the maximum transmission over both adjacent ITU wavelengths

25

dB

·ÇÏàÁÚͨµÀ¸ôÀë¶È

Non-Adjacent, Channel Isolation

Ratio of peak transmission in channel

passband to the maximum transmission over all non-adjacent ITU wavelength

29

dB

²åËðÒ»ÖÂÐÔ/Insertion Loss Uniformity

The difference between the maximum and minimum of passband across all channels

1.0

dB

Æ«ÏòÐÔ/Directivity(Mux Only)

Ratio of reflected power out of any channel(other than channel n)to power in from the input channel n

40

dB

»ØËð/Optical Return loss

Input & output ports

40

dB

Æ«ÕñÏà¹ØËðºÄ/Polarization Dependent Loss in Clear Channel Band

Worst-case value measured in ± 20GHz around ITU wavelength for each port.

0.5

0.7

dB

Æ«ÕñģʽɫɢPolarization Mode Dispersion

Maximum differential group delay within reference ITU wavelength

0.5

ps

É«¶ÈÉ«É¢/Chromatic Dispersion

Maximum change rate of group delay versus wavelength within reference ITU wavelength

-10

+10

ps/nm

×î´óÊäÈë¹â¹¦ÂÊMaximum Input Optical Power

Maximum continuous optical power

500

mW

»úе³ß´ç, ¹âÏËÊä³öºÍÁ¬½ÓÍ·ÅäÖÃ/Mechanical Dimensions, Fiber Coding and Connector Specifications

³ß´ç/Dimensions

120 x 70 x 10

mm

¹âÏËÀàÐÍ/Fiber Type

¹«¹²¶Ë/Common SMF-28e fiber with 900um loose tube/ SMF-28e ¼Ó900umËÉÌ×¹Ü

ͨµÀ¶Ë/Channels: SMF-28e Ribbons

¹âÏ˳¤¶È/Fiber Length

ÊäÈë¶Ë/Common

1000mm ± 50mm with 900um loose tube/ÊäÈëÏ˳¤1000mm ± 50mm 900umÌ×¹Ü

Êä³ö¶Ë/Channels

Ribbon 500mm± 20 mm and Fan out 500mm± 30mm with 900um loose tube

/Êä³ö´øÏË500mm± 20 mm£¬¼Ó·ÖÖ§Æ÷Ï˳¤500mm± 30mm

¹«¹²¶Ë/Common

ÑÕÉ«/Color

°×/white

´øÏ˱êʶ/Ribbon Identification

´øÏËÄ©¶ËÌùÊýÂëÌù±êʶ

/Label with ribbon number will be placed close to end-points

Á¬½ÓÆ÷ÀàÐÍ/Connector Options

ÊäÈë¶Ë/Common

LC/UPC

Êä³ö¶Ë/Channels

LC/UPC

´øÏ˹âÏ˱êʶ/Fiber Identification in Ribbon

1

˦/Blue

2

³È/Orange

3

ÂÌ/Green

4

ºÖ/Brown

5

»Ò/Grey

6

°×/White

7

ºì/Red

8

ºÚ/Black

9

Ȯ/Yellow

10

×Ï/Purple

11

·Û/Pink

12

Ë®/Aqua

 *¿É°´¿Í»§ÒªÇó¶¨ÖÆ/Customized design available     

4                           

 ¶©¹ºÐÅÏ¢/Ordering Information

FT-13-XAWG

X

XX

X

XXX

X

X

X

XX

XX

Type

Band

Number of Channels

Spacing

1st Channel

Chip Type

Package

Fiber Length(Total Length)

In/Out Connector

ÊÇ·ñÈ«¹ú²ú

AAWG=Athermal AWG

C=C-Band
L=L-Band
D=C+L-Band
X=Customize

16=16-CH
32=32-CH
40=40-CH
48=48-CH
96=96-CH
XX=Special

1=100G
2=200G
5=50G
X=Special

C62=C62
H61=H61
C60=C60
H59=H59
XXX=special

G=Gaussian
F=Flat Top

M=Module
R=Rack
X=Special

1=0.5m
2=1m
3=1.5m
4=2m
X=Specify

0=None
1=FC/APC
2=FC/PC
3=SC/APC
4=SC/PC
5=LC/APC
6=LC/PC
7=ST/UPC
X=Specify

GC=È«¹ú²ú
¿Õ=·ÇÈ«¹ú²ú

 Note: Typical channel plan: ITU wavelengths 50G H13(1566.72nm)-C61(1528.77nm).

 

 

 

 

 

×¢£º±¾²úÆ·ÓÐÈ«¹ú²ú»¯ÐͺſÉÑ¡
±¾²úƷΪFT-13ϵÁУ¬½öչʾ²¿·Ö²ÎÊý£¬ÈçÓÐÐèÒª£¬ÇëÁªÏµ×ðÁúÈËÉú¾ÍÊDz©¡£

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

ÍøÕ¾µØͼÍøÕ¾µØͼ
ÓÑÇéÁ´½Ó£º×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁúÈËÉú¾ÍÊDz©  ¶íÂÞ˹רÏí»á  KU¿áÓÎÌåÓý  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁú¿­Ê±  ÐË·¢ÓéÀÖ  »Ê¹Ú¹Ù·½ÍøÕ¾APP  ´ó½±¹ú¼Ê  ×ðÁúÈËÉú¾ÍÊDz©  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ×ðÁú¿­Ê±ÈËÉú¾ÍÊDz«  ´ó½±¹ú¼Ê